Call us
1-844-376-5474
All of our chemicals are ready to use and safe to ship worldwide.
EZ Green Cut is a diamond profiling solution containing nano abrasives which help to rapidly remove surface scratches during the grinding and cutting process. The nano abrasives work in conjunction with the tooling to reduce the need for multiple steps while profiling the floor.
ACID FREE
Coverage Rate: 500 sf/gal (9.82 m2/L)
Mixing: Ready to Use
Product Size: 5 Gallon Bucket
1) Saturate surface with water and keep wet.
2) Apply EZ Green Cut to the wet floor and begin grinding with Tool #1.
3) Keep the slurry in front of the grinding path. The slurry should be of the consistency of wet foam, not paste.
4) After grinding the floor with Tool #1, proceed with Tool #2. DO NOT remove or clean the slurry. Reuse the slurry while grinding with Tool #2.
EZ Densifier is a Lithium Silicate Densifier that improves surface performance and resists the harmful effects of traffic wear and tear by improving the abrasion resistance for new or aged concrete. Ideal for use with exposed and polished concrete.
Coverage Rate: 500-700 sf/gal (12-17 m2/L)
Mixing: Ready to Use
Product Size: 5 Gallon Bucket
1) Remove all dust and debris using an automatic floor scrubber and fresh water. Allow to dry.
2) Spray EZ Densifier onto the concrete floor or use a microfiber applicator to spread evenly on the surface. As product is absorbed into the surface, apply additional product as needed until floor starts to reject the Densifier.
3) Keep the floor wet for 15 minutes while spreading with a mop to avoid puddles. Allow to dry.
EZ Super Guard is a stain protector that is specifically formulated to protect polished and dyed concrete from stains and etching. It is designed to create stain resistance, color protection, and color enhancement. This is a high-gloss formula that will give your concrete floors an impressive shine.
Coverage Rate: 2,000-2,500 sf/gal (49-61 m2/L)
Mixing: Ready to Use
Product Size: 5 Gallon Bucket
1) Use a pump sprayer to apply EZ Guard onto the concrete surface and immediately spread evenly with a microfiber applicator. Apply enough material to evenly coat the entire surface without dry streaking or puddling
2) Allow EZ Super Guard to air dry to a tack-free state.
3) Burnish the floor with a high-speed burnisher using an EZ Pad.
4) Keep the floor dry for a minimum of 30 minutes after application.
EZ Maintenance Cleaner is specifically designed to remove daily debris from hard surfaces while extending the life of the EZ Super Guard on polished concrete. The cleaner rejuvenates water repellency of stain protection, especially in high traffic areas. The EZ cleaner contains no harsh chemicals.
Coverage Rate: 75,000-1,000,000 sf/gal (Coverage depends on equipment used)
Mixing: 4 oz to 25 gallon water
1) Apply EZ Maintenance Cleaner with an autoscrubber or mop. The autoscrubber should be fitted with a non-aggressive cleaning brush or pad.
2) After cleaning the floor, let the surface dry before allowing traffic to resume.
3) Remove dust and debris with a microfiber pad or dry mop between cleanings.
4) Regularly check the wear of the floor to determine if EZ Super Guard needs to be reapplied.
EZ Polish System Concrete Conditioner is recommended for use wherever soft or newly placed concrete needs to be hardened, dustproofed, and improved. Chemical and abrasion resistant surfaces are required.
• Repairs Soft Concrete.
• Reconditions old concrete slabs.
• Protects against scratching or peeling.
• Ready to use from the container and easy to apply.
• Penetrates deeply into concrete to densify and harden surfaces to help prevent entry of moisture and other foreign matter.
Coverage Rate: 600-800 sf/gal (Coverage depends on equipment used)
Product Size: 5 Gallon Bucket
1) After cleaning the floor, apply the EZ Concrete Conditioner with a sprayer or microfiber mop.
2) Apply enough material to evenly coat the entire surface without dry streaking or puddling.
Apply EZ Polish System Sealer Wet-Look Finish to perfect, protect, and preserve the natural beauty of all your concrete & masonry surfaces. This high-gloss formula can also be used on pavers and artificial stone, and makes a great topcoat over stains.
• Excellent Topcoat Over Paints & Stains.
• 100% Acrylic for Maximum Durability.
• Interior/Exterior & Vertical/Horizontal.
• Resists Hot Tire Pick Up.
• Non-Yellowing.
Coverage Rate: 200 – 450 sf/gal (Coverage depends on equipment used)
Product Size: 5 Gallon Bucket
1) Stir or shake before applying. DO NOT THIN.
2) Use product when Temperature is between 50 – 80 F(10 – 27 C). Do not apply in direct sunlight. Do not apply to wet surfaces or if rain or heavy dew is expected within 24 hours.
3) Apply a thin coat using a nylon/polyester brush, 1/4” – 3/8” nap roller, high quality pad applicator or a high quality pump sprayer with an adjustable tip at a spread rate of 200-450 sq ft (19-42 m2) per gallon. Spread rate is highly dependent on surface roughness and porosity. If sprayed, backroll to uniform thickness with a microfiber pad.
4) Allow first coat to dry 4 hours, then apply a second coat at a spread rate of 350-700 sq. ft (33-65 m2) per gallon. Additional coats (no more than 4) may be added for a higher gloss and added protection.
EZ Polish System Super Sealer PLUS repels both oil and water on most hard surface substrates, providing real stain protection without forming a typical film like “guard” stain protection.
Coverage Rate: 2500 – 3500 sf/gal (Coverage depends on equipment used)
Product Size: 1 Gallon
1) Spray a light mist of Super Sealer Plus onto the surface and immediately spread evenly with a microfiber pad. Apply enough product to keep the surface wet for about a minute before penetrating; attain 100% coverage, without either dry streaking or puddling.
2) Burnish with a high-speed burnisher, fitted with a 3000 grit or finer diamond-impregnated pad or auto-scrub with a white pad to remove the surface haze.
The EZ Grouting System is designed for repairing damaged control joints, filling pin holes, cracks, and chipped or damaged concrete. For use with the EZ Polish System. EZ Grouting System has a part A and part B, and is rapid setting and high strength.
Fill holes and cracks prior to polishing to ensure a flat and even floor profile:
• Easy to mix and apply.
• 2 Part Mixture: Part A and Part B.
• Rapid set, and high strength.
• Intended for use in damaged control joints, pin holes, cracks, and chipped or damaged concrete.
Small Holes:
1) For small hole repair mix 1 part A to 1 part B in a small mixing cup, then add grouting compound and mix.
2) Fill holes with grouting mixture and wait until completely dry.
3) Once material has dried, use a handgrinder to level the repairs.
Pinholes:
1) For pinholes mix 1 part A to 1 part B in a small mixing cup.
2) Apply a thin coat to the floor using a metal finishing trowel.
3) Wait for the floor to completely dry.
4) Continue with the EZ Polish System®.
Mixing: 1 Part A to 1 Part B. Add grouting compound.
EZ Dye is a newly engineered dye formula unique to the EZ Polish System®. Our formula applies evenly and consistently with vivid color. To see the wide variety of dye colors we offer, CLICK HERE FOR MORE INFORMATION
• Wide variety of colors available.
• Easy to apply and easy to handle.
• Consistent results.
• Saves time and money.
• Ideal for residential and commercial interior floors.
• Easy to maintain.
Coverage Rate: 2500-3000 SQ Feet
Mixing: Ready to Use
1) Complete step 3 of the EZ Polish System®.
2) Use a sprayer to apply EZ Dye onto floor.
3) Work EZ Dye into the floor with a microfiber applicator.
4) Wait for floor to dry, then burnish using the EZ Burnish Pad.
5) Apply a coat of EZ Superguard, wait until dry then burnish again with EZ Burnish Pad.
9328 Wheatlands Rd
Santee, CA 92076
info@EZPolishSystem.com
Hours of Operation: 8AM-4:30PM PST